We recommend scheduling about 15 minutes to install a two-camera PowerView system.

Less time - Install time is related to routing and hiding cables (e.g., cameras, microphones, GPS). If you don’t need to hide the cables, you can install the system in about 5 minutes.

More time - If you are carefully routing and securing cables or attaching rigger cameras, allow a bit of extra time.

Quick install primer...

• Install your PowerView system box

You can use Velcro to secure the system or use the mounting tray for a more permanent installation.

• Lay out cables and affix camera(s), mic and GPS

Attach your camera(s) using standard L-bracket or optional rigger mount or suction mount. Cameras are delivered pre-focused but you'll have to take some test recordings (or attach a DVD player) to make sure cameras are pointed properly and are focused.

Attach your microphone with Ty-wraps or Velcro provided with the PowerView system. Place your GPS antenna on top of the PowerView box or use double-sided tap to attach the antenna to the boat.

• Connect power

Attach your system to one of the Easy Connect 2-hour or 4-hour batteries. The system is configured to automatically power on.

• Start PowerView and begin recording!