Shopping cart[]

There are no products in your shopping cart.

0 ItemsTotal: $0.00

User login


Tech Specs - PowerView System

Video

  • Video format - NTSC4 composite video camera inputs NTSC or PAL
  • Video signal and power in single locking connector
  • Simultaneous dual frame recording (two MPEG encoders record two camera views full frame)
  • DVD quality resolution (704x480 video resolution)
  • MPEG 4
  • 30 frames per second recording (NTSC)
  • 2.5 - 8.0 Mbps video user-configurable bit rate
  • User configurable video layout - Multiple full screen, Picture-in-picture, split screen options using 1 to 4 camera views
  • Video out jack connector for camera setup

Audio

  • Two-channel input, single locking connector
  • Automatic Gain Control built-in
  • Line level or dynamic microphone inputs
  • 5v or 12v supply

Recording media

  • SD card, removable
  • USB key
  • Internal storage

Max logging time
Dependent on memory device size and resolution settings (examples below)

  • Recording single stream at 5Mb/sec onto a 2GB SD card allows 1 hour recording
  • Recording dual stream at 8 Mb/sec on both frame onto a 16GB SD card allows 2 hours of recording
  • Recording single stream at 2.5 Mb/sec onto a 16GB SD card allows 12.5 hours of recording

Control buttons

  • Membrane switch panel with heavy click and button feedback characteristics
  • Power on/off with user configurable auto power-on
  • Record/stop record with user configurable auto start/stop

High-visibility LEDs

  • Record –
    RED when system is recording
    RED BLINKING when closing video and data files after practice session
  • Power –
    GREEN system is on
    RED when system is off but power is available
    RED BLINKING during power on/off
  • Status –
    GREEN ready to record
    BLINKING RED GPS not yet locked
  • Transfer -
    YELLOW during software update
  • Memory used –
    3 GREEN when storage exceeds 25%/50%/75%
    YELLOW when storage exceeds 90%
    RED BLINKING when storage reaches capacity OR
    RED BLINKING when no USB or SD inserted

Data inputs

  • Locking 12-way connectors
  • 5 multi-function analog/digital sensor inputs

Mechanical

  • Custom flame retardant ABS enclosure
  • Width 7.35"/187mm, depth 4.75"/121mm, height (front) 1.4"/36mm and height (back) 2.1"/53mm
  • Weight 1.1 lb/0.5kg
  • Operating temperature: -20 to +55 C ambient
  • Storage temperature: -20 to +75 C
  • Shock: 0.25m onto hard surface, except connector face
  • Vibration: 6g @ 0-1KHz random pattern
  • Compliant with FCC part 15 Class A, and current CE standards

Power

  • 12v DC, 1Amp (15W max)
  • Locking power connector

Mounting options

  • 3M dual lock Velcro
  • 4-hole AMPS bolt pattern in case standard mount
  • Custom mounting plate for quick attach/release